A spare tyre inspection is not included in an MOT UK. Since the tyre is not actually connected at the time to the vehicle, it is not obliged to comply with regulatory standards.
Is it possible to fail an MOT because of low tyre pressure?
Despite the fact that tyre pressure isn't examined in an MOT, legislation passed in 2015 mandates that any vehicle with a malfunctioning or defective tyre pressure monitoring system (TPMS) will fail its MOT test.
Check MOT status of your vehicle and ensure you have the correct air pressure or have a faulty tyre pressure monitoring system repaired to avoid an MOT test failure.
Is the battery checked during the MOT test?
The battery must be safe and secure, with no symptoms of fluid leakage. An MOT tester will also inspect the state of your battery's connections, which should be tight and free of electrolyte leaks. To pass an MOT test, all electrical sockets must be in excellent working order.
This is such a simple fix that can be addressed by an individual or if not confident, for a small fee, your local mechanic will be able to resolve it. If you go through the MOT history of your vehicle and establish this was a reason for failure in the past, address this beforehand to avoid any unnecessary hassle.
What is the average length of time for an MOT test?
An MOT test takes about 45 to 60 minutes on average, but there are a few more factors to consider. First, if your car fails the test and repairs are required, the process will be delayed.
Unless the prior MOT certificate is still valid or you're driving the vehicle to get the faults corrected, an MOT test centre is not authorised to let you drive away a car that has failed an MOT test until the problems are fixed.
Secondly, just because the test takes an hour or less does not mean your car will only be at the garage or MOT centre for 60 minutes if no repairs are necessary.
You may need to drop off your car in the morning and pick it up after it's ready, which will most likely be by the end of the day.
This implies that you should plan on going without a vehicle for the whole day.
Is it possible to fail the MOT if the boot won't open?
The vehicle will not fail if the boot is jammed shut, but the MOT testing station may refuse to MOT the vehicle if the tester is unable to access specific places (like the rear seatbelt mounts).
Will an MOT fail if a door lock is broken?
Hinges that are broken or damaged, restrict the door from being fully secured to the vehicle. This will result in an MOT failure on the grounds of safety.
Both of the front doors will be opened and checked for their condition and fitment to the vehicle during the inspection. The inspector must ensure that doors may be opened from both the inside and the outside. The inspector will also double-check that the doors are properly closed.
If your vehicle has rear doors, they may need to be opened to enable the inspector access to the back to assess additional MOT problems.
What isn't examined during an MOT?
Some of the most crucial parts of a car that aren't tested in an MOT include the clutch, gearbox and engine. This is because they aren't seen as life-threatening. This does not include the engine mountings are they are tested due to safety.
Is it possible to fail an MOT if your car is dirty?
If your vehicle is excessively dirty, an MOT tester may refuse to do the test, and you might wind up failing it before it even starts. Make sure your vehicle is clean and tidy, and that the windows, doors, bonnet release, and boot all operate before your test.
Your licence plates must also be clean and visible from the back, with a functional light bulb.
Before you go to the MOT centre in UK, give them a quick clean down and make sure the bulb is operating to prevent an MOT failure.
Comments
Post a Comment