Many modern braking systems require the use of an ABS pump, but what are the signs that it should be replaced?
Search
online for a car garage in
Reading and book your car in with a qualified car mechanic to fully
diagnose the ABS system and repair or replace the necessary parts.
What is the purpose of the pump?
On
most vehicles, the ABS pump is a safety component that is part of the anti-lock
braking system (ABS). The system as a whole has been meticulously designed to
minimise severe brake lockup, as well as sliding, hydroplaning, and traction
loss, during harsh braking. It's especially important in muddy terrains and in
harsh weather conditions like slick roads or heavy downpours, because it helps
the driver maintain entire vehicle control.
To
avoid a MOT test failure, check MOT
status of your vehicle and get the ABS pump fixed or replaced
before your next MOT test.
What is An ABS System and How Does It Work?
Every
ABS system is made up of the ABS pump and ABS sensors, which are mounted on
each wheel. If the car is skidding or losing traction, the ABS sensors assess
wheel speed and send a signal to the ABS pump to rapidly activate – that is,
engage and disengage – the brakes.
Your
car is more likely to skid, swerve and lose traction while braking hard if your
ABS system isn't operating properly. The last thing you want to find out is
while you're in a hurry in terrible weather, risking a vehicle accident.
Hence
it is recommended to book your car in with a reputable garage in Reading and
allow a trained technician to fix the issue.
As
previously stated, a failed MOT test might be caused by a faulty ABS pump. Check MOT history of
your car to see whether this was a previous reason for a MOT failure. If
that's the case, speak with your mechanic to make sure there aren't any
additional problems.
Fortunately,
there are various signs that your ABS pump needs to be replaced. Some of them
are as follows:
1. ABS Light Comes On- This
is the most noticeable symptom on our list, as well as the most common
indicator that your ABS is malfunctioning. On newer vehicles, look for an ABS
warning light, which is usually orange or amber in colour and has an ABS emblem
on it. On older cars, the check engine warning light may indicate a problem
with this system.
2. Brake Pedal Isn't Working
- Have you noticed that pushing the brake pedal requires a little more effort
than usual? This might be the first sign that your ABS pump isn't working
properly. If you notice that your brakes aren't as responsive as they used to
be, this might be a red indication that something needs to be checked into.
It's not a good idea to pump or push the brake pedal all the way down for
little or no response from the brakes. In short, get professional help as soon
as you realise something is wrong with your brake pedal. Allowing your brakes
to become completely unresponsive is not a good idea.
3. Brake Pedal Needs More
Force - Your car's brake pedal is designed to work with the minimum of effort
possible, and stopping should only require a light touch in a car with
effective ABS. If you observe that you have to use more force to get the same
degree of braking force, the ABS pump might be failing. Seek competent advice
as soon as possible.
4. Brakes Locking Up - The
sole purpose of an ABS system is to prevent your brakes from locking up in
challenging situations, allowing you to retain a high degree of traction. A
faulty ABS pump, on the other hand, might be the cause of your brakes locking
up under normal driving conditions. If your brakes start to act weirdly, or if
you hear unusual clicking noises or feel the brakes pumping, you may have a
problem. It's time to see a professional if the condition worsens to the point
where the brakes lock the wheels up while driving. The ABS pump is almost
definitely broken and will require replacement.
5. Speedometer Failure - It's
likely that your brakes are faulty, but ABS failures can also cause problems with
your speedometer, stopping you from knowing how fast your car is driving. The
ABS pump might cause the speedometer to stop working correctly if it fails or
becomes faulty. It will either indicate an incorrect speed or, worse still,
show that the car is moving at 0 miles per hour. This may be followed by the
illumination of the ABS or check engine lights. Even if there isn't a light,
faults with the speedometer are a significant signal that your car should be
examined by a professional car mechanic.
ABS
pump issues must be addressed immediately if you want to retain your car's
efficiency, acceptable handling, and performance. Keep a watch on this list of
symptoms to make sure you don't hurt yourself or create any accidents.
Comments
Post a Comment